Vertical Communications DXP Series - Manual (Page 48)

8.2 Storing Feature Buttons
•
To store special-purpose feature buttons,
1. Press OPTIONS.
2. Press NEXT until FEAT option appears.
3. Press FEAT.
4. Press NEXT until the feature you want is displayed.
5. Press desired feature button.
6. Press programmable button to choose storage location.
7. Press FEAT again to program another feature or EXIT to end.
NOTE: To clear a feature button assignment, repeat this procedure,
but press CLEAR before pressing storage location button.
8.3 Storing A Response Message Button
•
To store a scrolling RESPONSE MESSAGE button,
1. Press INTERCOM.
2. Dial ✳ ✳ 6.
3. Press programmable button for RESPONSE MESSAGE button
location.
4. Dial 00.
5. Press # to save programming.
6. Press SPEAKER to end.
7. Label button location.
•
To store a fixed RESPONSE MESSAGE button,
1. Press INTERCOM.
2. Dial ✳ ✳ 6.
3. Press programmable button for RESPONSE MESSAGE button
location.
Programming Your Telephone GCA70–258
8 – 2 LCD Speakerphone Station User's Guide