Vertical Communications DXP Series - Manual (Page 60)

•
There are eight headset loudness levels. Set the level for the
current call as follows:
1. While on a call and in headset mode, press the VOLUME UP or
VOLUME DOWN button once for each change in loudness you
desire.
NOTE: On telephone models 8024S-** and 8012S-** your installer
may have turned on the “high handset volume” feature,
providing 13 handset/headset volume levels instead of 8.
•
To set a permanent group listening, speaker, headset, or handset
loudness level for all future calls,
1. Press INTERCOM.
2. Activate speaker, headset, handset, or group listen mode that you
want to affect.
3. While in that mode, press the VOLUME UP or VOLUME
DOWN button to adjust loudness.
4. Dial ✳ ✳ 7 or press a preprogrammed SAVE button to hold the
loudness at the last setting for all future calls (until you change the
default again).
5. Repeat this procedure in each mode until you have set all default
volume levels.
Using The Other Telephone Features GCA70–258
9 – 8 LCD Speakerphone Station User's Guide