Pilz PSEN cs4.1a - Manual (Page 15)

PSEN cs4.1a/b/p/M12
Operating Manual PSEN cs4.1a/b/p/M12
22187-EN-02
15
Slide the actuator on to the screws.
Align the safety switch and tighten the
screws.
Align the actuator and tighten the screws.
For the next steps you will need the seals as
illustrated.
Use the seals to close the screws' mounting
holes on the actuator
} (4): Without UL approval
} (1): For UL approval
Use the seals (2) to close the unused
mounting holes on the actuator.