Minimum distance from reflecting surfaces – Pilz PSEN op4H-s-30-150/1 User Manual
Page 19
Advertising
Instruction Manual
PSEN op4F/H-s Series
15
2.2.2. Minimum distance from reflecting surfaces
Reflecting surfaces placed near the light beams of the safety device
(over, under or laterally) can cause passive reflections. These
reflections can affect the recognition of an object inside the controlled
area.
However, if the RX receiver detects a secondary beam (reflected by
the side-reflecting surface) the object might not be detected, even if
the object interrupts the main beam.
Fig. 7
Advertising
This manual is related to the following products: