Sangean DDR-62 (R1) - Manual (Page 22)

2
Selecting a radio station by location - cont.
8. Press the Tuning Up or Down buttons on the touch panel to highlight your chosen radio station
and then press the Select button to enter your selection. The display will show ‘Connecting…’
while the radio connects to the new station. The station should then start playing. Adjust the
volume as needed.
If the station has on-demand content, that is, it gives the option of listening to programs which
have already been broadcast or to Podcasts, there will be an additional screen showing the
radio station name as well as a ‘Podcasts’ option. These are selected using additional menus,
determined by the radio station and the content. There may simply be a list of programs, or
there may also be options to choose from broadcasts on particular dates or days of the week.
The examples shown here are typical. Podcasts and Listen Again content can also be accessed
separately from the main Internet Radio menu.
If your radio cannot connect to a radio station
Note:
If your radio is unable to connect to an internet radio station it will generally either display ‘Network
Error’ or ‘Stopped’. This can be for many reasons, but typically Will be due to one of the following:
The radio station may not be broadcasting at the preset time.
The radio station may not be able to accommodate any more connections from internet listeners.
The broadcaster may limit listening to specific countries or regions.
There may be network congestion (either locally or at a distance) which is affecting the reliability
of the connection.
If your radio can connect, but the audio is not continuous and the radio keeps having to
reconnect, this may be due to the radio station only having limited connection capacity.