Phone book design example 1 – Talkaphone VOIP-8 VoIP Interface (8 channels) User Manual

Page 20

Advertising
background image

VOICE OVER IP INTERFACE

Installation and Operation Manual

20

Phone Book Design Example 1


In Figure 2-1, we have a one-to-one configuration. Each emergency phone will have an assigned
PBX extension, so the head end VOIP-4 will only be using three of its four channels. Also, in this
scenario, the PBX is set to ringdown mode, so every emergency phone is programmed with *13*5*
and each VOIP unit connected to an emergency phone is configured to auto call/hotline to the
attendant phone.

Figure 2-1: Example of a one-to-one VoIP System Configuration

For the VOIP units connected to emergency phones, we would program the phone books with the
following information.

Emergency Phone 1:
Inbound Phone Book entry:

101

Outbound Phone Book entry:

201 assigned to 192.168.37.40

Emergency Phone 2:
Inbound Phone Book entry:

102

Outbound Phone Book entry:

202 assigned to 192.168.37.40

Advertising