Computer requirements, Placement – Talkaphone VOIP-8 VoIP Interface (8 channels) User Manual
Page 8
VOICE OVER IP INTERFACE
Installation and Operation Manual
8
Computer Requirements
Minimum Requirements for Windows GUI:
The computer on which the VOIP-1-2-4-8 units’ configuration program is installed must meet these
requirements:
•
must be IBM-compatible PC with MS Windows operating system
•
must have an available COM port for connection to the VOIP-1-2-4-8 unit
However, this PC does not need to be connected to the VOIP-1-2-4-8 unit permanently. It only needs to
be connected when local configuration and monitoring are done. Nearly all configuration and monitoring
functions can be done remotely via the IP network.
You will need an available COM port on the controller PC. You’ll need to know which COM port is
available for use with the VOIP-1-2-4-8 (COM1, COM2, etc.).
Minimum Requirements for Web GUI
•
Local Windows GUI must have been used to assign IP address to VOIP-1-2-4-8.
•
Internet Explorer 6.0 or higher; or Netscape 6.0 or higher
•
Java Runtime Environment version 1.4.0_01 or higher
Placement
Mount your VOIP-1-2-4-8 in a safe and convenient location where cables for your network and phone
system are accessible.