Talkaphone VOIP-8 VoIP Interface (8 channels) - Manual (Page 35)

VOICE OVER IP INTERFACE
Installation and Operation Manual
35
Link Management screen Field Definitions (cont’d)
Field Name Values Description
Link Status Parameters
These fields summarize the
results of pinging.
IP Address
column
a.b.c.d 0-255
Target of ping.
No. of Pings Sent
as listed
Number of pings sent to target
endpoint.
No. of Pings
Received
as listed
Number of pings received by
target endpoint.
Round Trip Delay
(Min/Max/ Avg) as listed, in
milliseconds Displays how long it took from
time ping was sent to time ping
response was received.
Last Error as listed
Indicates when last data error
occurred.
About Packetization Time
You can use the Packetization Time screen to specify definite packetization rates for coders selected in
the Voice/FAX Parameters screen (in the “Coder Options” group of fields). The Packetization Time
screen is accessible under the “Advanced” options entry in the sidebar list of the main VOIP software
screen. In dealing with RTP parameters, the Packetization Time screen is closely related to both
Voice/FAX Parameters and to IP Statistics. It is located in the “Advanced” group for ease of use.
Packetization rates can be set separately for each channel. The table below presents the ranges and
increments for packetization rates.
Packetization Ranges and Increments
Coder Types Range (in Kbps);
{default value} Increments (in Kbps)
G711, G726, G727 5-120 {5} 5
G723 30-120 {30} 30
G729 10-120 {10} 10
Netcoder 20-120 {20} 20
Once the packetization rate has been set for one channel, it can be copied into other channels.