Storix Software SBAdmin TSM Edition Users Guide - Manual (Page 46)

Storix System Backup Administrator 46 Version 8.2 TSM Edition User Guide
2. If the Job Information is displayed on the Main Screen , select the icon for the job to change and press
the Change button at the bottom of the screen.
The current job settings for the selected job will appear. Make all desired changes to the information on the
screen, then press the
Save button to save the changes clear the selections.
Copying a Backup Job
To copy a configured backup job to a new job id, either:
1. Select Configure !Backup Jobs from the menu bar, then type or select the Job ID to copy at the top of
the screen.
2. If the Job Information is displayed on the Main Screen , select the icon for the job to copy and press the
Change button at the bottom of the screen.
The current job settings for the selected job will appear. Make all desired changes to the information on the
screen and press the
Copy button. You will be prompted with a new pop-up window for the job ID to copy the
configuration to. After typing in the new job ID, press the Copy button and the job will be copied to the new job
ID. Note that if you made changes to the options of the original job and did not save them, then these changes
will only be applied to the new job ID.
Renaming a Backup Job
To rename a configured backup job to a new job id, either:
1. Select Configure !Backup Jobs from the menu bar, then type or select the Job ID to rename at the top
of the screen.
2. If the Job Information is displayed on the Main Screen , select the icon for the job to rename and press
the Change button at the bottom of the screen.
The current job settings for the selected job will appear. Make all desired changes to the information on the
screen and press the
Rename button. You will be prompted with a new pop-up window for the job ID to rename
the configuration as. After typing in the new job ID, press the Rename button and the job will be renamed as the
new job ID. Note that if you made changes to the options of the original job and did not save them, then these
changes will be applied to the new job ID.
Removing a Backup Job
To remove a backup job, the job may not currently be in a job queue . A job will only be in a job queue if it is
currently running, waiting to be run, has been placed on hold, or had previously failed.
To remove a backup job, either:
1. Select Configure !Backup Jobs from the menu bar, then type or select the Job ID at the top of the
screen, then press the Remove button.
2. If the Job Information is displayed on the Main Screen , select the icon for the job to remove and press
the Remove button at the bottom of the screen.
Running a Backup Job on Demand
Any backup job, whether it is currently scheduled or not, may be run at any time. There are several ways to
start a job running: