Storix Software SBAdmin TSM Edition Users Guide - Manual (Page 71)

Select the specific backup job to verify by clicking on the button to the left of the desired job.
5. Next, if there are multiple backups (clients) in the job, another screen will appear with a list of backups
to select from. The information about the backup will be preceded by the backup sequence number,
starting with 1 and ending with the last backup (client) on the media.
The following is a sample of this screen:
You may select any one or more backups to verify by clicking on the button to the left of the desired
selection and a checkmark will appear in the button. If you wish to de-select an option, simply click the
button again and the checkmark will disappear. When all selections have been made, click the
Continue button at the bottom of the screen.
The selected Backup ID and Backup Seq#(s) will appear on the Verify Data from a Backup screen.
From this screen, press the Begin Verify button to start reading the backups.
Displaying the Status and Output of the Verify
After performing the steps above, the verify will begin and the verify status report screen, as shown below, will
appear automatically. Listed on the screen will be a status line for each of the backup(s) previously selected.
Information pertaining to the progress and performance of the verify will be updated for each line as the
corresponding backup is being read.
Storix System Backup Administrator 71 Version 8.2 TSM Edition User Guide