CANOGA PERKINS 1500 Domain Management Module - Manual (Page 35)

Manage a CIM
The CIMs can interconnect up to eight chassis in one domain. Use the CIM Management screen
to view real time and static information about the chassis. Each CIM monitors a variety of
operational parameters for the chassis that it is in, including:
• Chassis type
• Power supply status and chassis temperature
• Clock status
• Major and Minor alarms status
To access the CIM Management screen, follow these steps:
1. From the DMM Main Menu, type 5 , or "Manage or access the CIM modules," and press
<Enter>.
2. The CIM selection appears at the right of item 5; press <Space> to cycle through the options,
then press <Enter> to select a CIM. The CIM Management screen appears with information
and status for the chassis and CIM. See Figure 10.
3. To return to the Main Menu, press <Esc>.
CIM MANAGEMENT
CIM : 2
Chassis Type: 2U Chassis CIM Status: Online
Redundant Power: Yes
Primary Power Type: DC isolated CIM clock: Good
Primary Power status: Good CIM Providing Clock: Enabled
Secondary Power Type: DC isolated CIM Interlink Clock: N/A
Secondary Power Status: Good Alarm Relay Status: Major & Minor
Fan Installed: Yes Alarm Latch Status: Major & Minor
Fan Status: Good Backplane Alarm Inputs: Off
Up Link Installed: No CIM Major Alarm: Off
Down Link Installed: No CIM Minor Alarm: Off
CIM Model: 1202-2000 Chassis Temperature: OK
CIM Firmware: 3.5
CIM Serial Number: 20011195838
CIM Hardware Version: A2A
1. Reset Major and Minor Alarm Relay
Figure 10. CIM Management Screen
Note: For details on the CIM, the Alarms, and the soft reset, see the Model 1200 Chassis
Interconnect Module User Manual.
Manage a Module
If you know which chassis and slot a specific module is installed in, you can directly access and
manage it through the Module Menu. For details about a specific module, see the User Manual
for that module.
Note: You can manage most features of a module by opening the chassis management screen,
then selecting the module in the chassis; however, you cannot name a module through
that path.
To update software for a module, either follow the steps in the User Manual for the module or see
the steps on page 3-10.
Model 1500 Domain Management Module 3-23