CANOGA PERKINS 9161 Network Interface Device - Manual (Page 20)

4.4 9161 Main Menu
The first screen is the Login Menu. If this is your initial setup and no password has been set, press
<Enter> at the prompt for the password. Otherwise, type your password and press <Enter>.
The Main Menu appears after you log in and provides access to all functions for the 9161: setup,
diagnostics, and reports. See Figure 5.
MAIN MENU
1) System
2) Switch Configuration
3) Port Information
4) Reports
5) Diagnostics
6) Utilities
7) Logout
Figure 5. 9161 Main Menu
4.5 System Menu
The System Configuration menu provides access to most configuration options for the 9161. To
access the System Configuration menu, see Figure 6 and Table 3 and follow these steps:
1. From the Main Menu, type 1 , "System Configuration," and press <Enter>. The System
Configuration menu appears.
2. To return to the Main Menu, press <Esc>.
SYSTEM
1) System Information
2) IP Settings
3) Host Table/SNMP Settings
4) Notification Settings
5) Security Configuration
6) Account Configuration
7) Main Menu
Figure 6. System Menu
Table 3. System Menu Option Definitions
Selection Description
1) System Information Shows fan, temperature, and power supply status for the 9161
2) IP Settings Shows access control information; you can set options
3) Host Table/SNMP Settings Shows host access IP information; you can set options
4) Notification Settings Shows information for hosts that will receive traps and alarms;
you can set options
9161 Network Interface Device 4-4