CANOGA PERKINS 9161 Network Interface Device - Manual (Page 26)

Menu Item Description
15. Lockout Console Port Enable or disable access to the serial port
16. Inactivity Logout time Set the time, between 1 and 30 minutes, before
automatic log-out with no activity; 0 = disabled
4.5.6 User Accounts Screen
The User Accounts screen lists information about and options to set up system users by user name.
To access the User Accounts screen, see Figure 14 and follow these steps:
1. From the System menu type 6 , "Account Configuration," and press <Enter>.
2. At the User Accounts screen, type 1 to edit a user at the Edit User Account screen, or 2 to add a
user at the Add User Account screen, or type 3 to remove a host, then follow the prompts.
3. To return to the System menu, press <Esc>.
USER ACCOUNTS
Account Access Access Auth Priv Lockout Locked
Username State From Level Description Proto Proto User Out
admin Enabled All Supervisor Default Account None None No No
1. View/Change Account
2. Add Account
3. Delete Account
4. Main Menu
Figure 14. User Accounts Screen
4.6 Switch Configuration
The Switch Configuration menu offers options to set network parameters; see Figure 15 and Table 6.
SWITCH CONFIGURATION
1. Global Spanning Tree Parameters
2. Multiple Spanning Tree Parameters
3. Global Spanning Tree Report
4. Lag Configuration
5. VLAN Configuration
6. GVRP Configuration
7. Main Menu
Figure 15. Switch Configuration Menu
9161 Network Interface Device 4-10