CANOGA PERKINS 9161 Network Interface Device - Manual (Page 33)

10G 1 INFORMATION
Model Number : 9500-330
Model Description : 10/100/1000 UTP Interface
Serial Number : 20031122137
Model Revision : A1
Link Status : Link Up
LLF Status : No LLF condition for this port
Remote Fault Status : None
Physical Status : 100 Full
1. Admin Mode : enable
2. Flow Control : disable
3. Link Trap : enable
4. Physical Mode : AutoNeg
5. LACP Mode : enable
6. Network Led : off
7. LLF Partner : disable
LLF Direction : disable
8. Remote Fault : disable
9. Main Menu
Figure 27. Port 10G x Information Screen
10G 1 STATISTICS
RECEIVED RX & TX TRANSMITTED
Total 7462 Fr=64 6394 Total 1630
UnicastPkts 1645 Fr65-127 2000 UnicastPkts 1628
MulticastPkts 654 Fr128-255 505 MulticastPkts 0
BroadcastPkts 5163 Fr256-511 505 BroadcastPkts 2
Fr>1522 0 Fr512-1023 3 TotalErrs 0
TotalMacErrs 0 Fr1024-1518 4 TxCRCErrs 0
Jabbers 0 Fr1519-1522 4 Oversized 0
UndersizeFrs 0 Fr1523-2047 0 UnderrunErrs 0
AlignmentErrs 0 Fr2048-4095 0 TotalDiscards 0
RxCRCErrs 0 Fr4096-9216 0 SnglCollision 0
Overruns 0 MultCollision 0
TotalDiscards 0 ExcCollisions 0
1. Change Port :
2. Clear Counters
3. Main Menu
Figure 28. Port 10G x Statistics Report
4.8 Report Menu
The Report menu shows the current information for the 9161. To access the Report menu, see
Figure 29 and Table 9 and follow these steps:
1. From the Main menu, type 4, "Reports," and press <Enter>.
2. From the Reports menu, type a number to view a report, and press <Enter>.
3. To return to the Main Menu, type 4.
9161 Network Interface Device 4-17