CANOGA PERKINS 9161 Network Interface Device - Manual (Page 31)

4.6.5 VLAN Configuration
Use the VLAN Configuration screen to view and set VLAN parameters for the 9161. See Figure 23.
To access the VLAN Configuration screen, follow these steps:
1. From the Switch Configuration menu, type 5, "VLAN Configuration," and press <Enter>.
2. At the VLAN Configuration screen, type 1 to view VLAN information and press <Enter>, then
follow the prompts on the screen. The VLAN Information screen appears; see Figure 24.
3. To add or remove a VLAN, type 2 or 3 and press <Enter>, then follow the prompts on the screen.
4. To return to the Switch Configuration menu, press <Esc>.
VLAN CONFIGURATION
VLAN ID NAME TYPE
1. 1 Default Default
1. View/Change Vlan :
2. Create Vlan :
3. Delete Vlan :
4. Main Menu
Figure 23. VLAN Configuration Screen
VLAN 1 INFORMATION
PORT/LAG CURRENT CONFIGURED TAGGING
SP 1 Include Include disable
SP 2 Include Include disable
SP 3 Include Include disable
SP 4 Include Include disable
1. VLAN Name : Default
2. Make Static : static
3. View/Change Interface :
4. Main Menu
Figure 24. VLAN Information Screen
4.6.6 GVRP Configuration and Information
Use the GVRP Information screen to view and set GVRP parameters for the 9161. See Figure 25. To
access the GVRP Information screen, follow these steps:
1. From the Switch Configuration menu, type 6, "GVRP Configuration," and press <Enter>.
2. At the GVRP Configuration menu, type the number for an item and press <Enter>, then press
<Space> to cycle through the options and press <Enter> to select an option.
9161 Network Interface Device 4-15