CANOGA PERKINS 9171 Configuration Guide - Manual (Page 274)

CanogaOS Configuration Guide
46-3
46.3.3 Uploading a configuration file by using FTP
You can upload a configuration file from the switch to an FTP server. You can later
download this configuration to the same switch or to another switch of the same type.
Beginning in privileged EXEC mode, follow these steps to upload a configuration file to
an FTP server:
DUT#configure terminal Enter global configuration mode.
DUT(config)#ftp username test (Optional) Create a user “test”.
DUT(config)#ftp password test (Optional) Create a password “test”.
DUT(config)#end Return to privileged EXEC mode.
DUT#copy flash:/boot/startup-config.conf
ftp://test:[email protected]/startup-config.conf
Upload a startup configuration file to remote FTP
server.
User’s name is “test”; the password is “test”.
46.3.4 Deleting a Stored Configuration File
DUT#delete flash:/startup-config.conf Delete the configuration in flash.
46.4 Writing running configurations to startup configuration
file
If you want to save current configurations, beginning in privileged EXEC mode, follow
these steps to write running configurations to startup configuration file.
DUT#write Save configurations.
DUT#show running-config Verify your entries.
DUT#show startup-config Verify your entries.