Panasonic OMNIVISION PV-S9670 - Manual (Page 24)

Tape Operation
COMMERCIAi-'^AaVAftCB^
----------------------------------------------------
ccwwEfiOAi-^'-AOWWce* detects and marks the beginning and end points
of commercials on your tape for recordings over 15 minutes in length.
When COMMERCIAL-^^ABVAMCE* marked tape is played back, the VCR
automatically advances through the commercial segments at high speed.
You can also set this feature to Manual so as to have more control over
the advance process. The effectiveness of this system can vary due to
differences in the \way television stations broadcast. See page 26 for
answers to the most commonly asked questions about this feature.
'------------------ !------------------------------------------------------ ^
coMMEKiAL-^-JkDVANCB^ Marking
When C/A RECORD; ON, VCR automatically rewinds the tape after a
recording has been made and marks the beginning and end of any
detected commercial blocks. After marking is done, the tape is returned to
the end of recording. Commercials are not erased from the tape.
Display menu.
Press ACTION.*
Display SET UP FEATURE.
1) Press AT to select.
2) Press ► to display.
1^^Check list before you begin.
□ All connections are made.
O One time Setup completed.
□ VCR is plugged in.
Q TV is turned on and set to the VCR channel
(CH 3 or 4).
2
----------- MENU
SET UP VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
IDI ОМА / LONGUE;ENGL ISH
SELECT
SET
END A T KEY
► KEY
ACTION KEY
3
------ SET UP FEATURE
TIMER PROGRAM
SET UP COMMERCIAL ADV.
SELECT
SET
END A V KEY
► KEY
ACTION KEY
Display SET UP
COMMERCIAL ADV.
1) Press AT to select.
2) Press ► to display.
4
SET UP COMMERCIAL ADV.
C/A PLAYBACK
ON
AUTO
SELECT
SET
END
A
▼ KEY
► KEY
ACTION KEY
Set ON or OFF.
1) Press AT to select.
2) Press ► to set.
2 SELECT/
SET
З А PLAY
▼ :STOP
4--
1
ACTION
5
NUMBERED
keys
When using the timer to record two
adjacent shows on the same channel,
better accuracy can be obtained by
programming each shows separately.
ON Timer, VCR Plus+ System, and One Touch recordings are marked automatically.
THE VCR IS WAITING TO
MARK COMMERCIALS IN THE
PROGRAM YOU RECORDED.
MARKING
NOW
LATER
CANCEL
PUSH 1 KEY
PUSH 2 KEY
PUSH'ACTION KEY
When STOP is pressed during norma! recording, Select one of a) or b) or c).
a) Press 1 key to mark the recording now.
“NOW MARKING COMMERCIALS” appears.
b) Press 2 key to mark the recording later (after the power has been turned off).
• If the tape is rewound and another recording started before the power is
turned off, commercials may not be marked correctly.
c) Press ACTION to cancel the marking of this recording.
OFF The VCR will not mark commercials.
When you are editing or dubbing a tape, or when you do not wish to use this feature, OFF should be selected.
Return to normal screen.
Press ACTION three times.
For assistance, call 1-800-211-PANA(7262).