Panasonic OMNIVISION PV-S9670 - Manual (Page 25)

‘Important: If the remote control POWER, ACTION, PROG, CHA/v, INDEX/ M/A SKIP, NUMBERED keys,
INPUT, TAPE POSITION, or ADD/DLT button does not work when pressed, press the VCR button
on the remote and try the button again.
COMMEROAL'^'^ADVANCE^ Playback
When playing back recording which have been marked using
cOMMe/?a4t*^*AmBiMCff*feature, you can either set VCR to
automatically advance through marked commercial blocks,
or set it so that commercials are only skipped on your command.
Display menu.
Press ACTION.*
2
----------- MENU
SET UP VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
ID1OMA/ UNGUE: ENGL I SH
SELECT;* ▼ KEY
SET :► KEY
END
;ACT I ON KEY
Display SET UP FEATURE.
1) Press
AW
to
select.
2) Press ► to set.
3
------ SET UP FEATURE
TIMER PROGRAM
SET UP COMMERCIAL ADV.
SELECT
SET
END * ▼ KEY
► KEY
ACTION KEY
Display SET UP
COMMERCIAL ADV.
1) Press
AW
to
select.
2) Press ► to set.
4
SET UP COMMERCIAL ADV.
C/A RECORD : ON
C/A PLAYBACK
SELECT;*
T
KEY
SET :► KEY
END :ACT I ON KEY
Set AUTO or MANUAL.
1) Press
AW
to
select:
2) Press ► to set.
AUTO VCR will automatically advance through
marked commercial blocks recorded on the
tape and then resume playback.
MANUAL VCR will advance through commercials only
when ZERO/ C/A SKIP is pressed. Playback
will resume when the end mark of a commercial
block is found, or a new recording or blank
portion is detected, or after 8 minutes.
Return to normal screen.
Press ACTION three times.
CQUWTiPft£SEi OfSPUlf TAPE ,
O □ O
SPEED
o O 0?
© GS!
SKIP
PLAY
1 ‘114.1
\
-- J [(iiji
:©c©0L
FF
2 SELECT/
SET
A :PLAY
▼ :STOP
► ;FF
ZERO/
C/A SKIP
CQMMBROAL^-^-ADVANCE* Is a trademark of SRT, Inc.
A Jerry Iggulden invention licensed in association with
Arthur D. Little Enterprises, Inc.
U.S.Pat. No. 5,333,091
other patents pending
The selection mode in step 4 remains set unless there is a power outage in which case the original factory
setting will be restored.
If playback is started in the middle of a commercial, only a single commercial is shown, or an individual
commercial is longer than 1 minute, a commercial may not be skipped.
Press FF to quickly advance through the commercial.
Part of a recorded program may be skipped over if the program portion between commercials is less than one
minute or there are frequent dark and quiet scenes during the program. To view the portion of tape being
incorrectly skipped, press PLAY while the VCR is skipping, reverse the tape to a point just prior to where the
skipping began and press PLAY again. This time the group will not be automatically skipped. Automatic
skipping will be re-enabled when the end of the marked group is detected.
25