Reset all vcr memory functions, Prevent accidental tape erasure, Dst (daylight saving time) – Panasonic OMNIVISION PV-S9670 User Manual

Page 44: Vcr & cassette information

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

VCR & Cassette Information

Reset All VCR Memory Functions

Use when moving VCR to new location, or if a mistake

was made in the One Time VCR Setup section.

• Make sure a tape is not inserted in the VCR.

Press and hold both PLAY

and CHANNEL A on the VCR
for more than 5 seconds.
• The power will shut off.

3 Do “One Time VCR Setup” steps on page 8.

Prevent Accidental Tape Erasure

Break off the tab.

Tab

Screw driver

DST (Daylight Saving Time)

VCR auto adjusts clock for DST. (Page 11.)

Spring (First Sunday in April)
DST:ON --> sets clock ahead one hour.

NORMAL TIME

1:00 a.m. 2:00 a.m.

DAYLIGHT

SAVING TIME

3:00 a.m. 4:00 a.m.

Autumn (Last Sunday in October)
DST:ON --> Turns clock back one hour.

DAYLIGHT
SAVING TIME

1:00 a.m. 2:00 a.m.

NORMAL TIME

1:00 a.m. 2:00 a.m.

If your area does not observe Daylight Saving

Time, select DST:OFF.

Keep these time changes in mind when
programming the VCR for timer recordings.

Record/Playback Time

Only use tapes with the mark in this unit.

Tape Speed

Setting

Type of Video Cassette

T60

T120

T160

SP

(Standard Play)

1 Hour

2 Hours

2 Hours

40 Minutes

LP

(Long Play)

2 Hours

4 Hours

5 Hours

20 Minutes

SLP

(Super Long Play)

3 Hours

6 Hours

8 Hours

44

For assistance, call 1-800-211-PANA(7262).

Advertising