Panasonic OMNIVISION PV-S9670 - Manual (Page 39)

‘Important: If the remote control POWER, ACTION, PROG, CHA/T, INDEX/ M/A SKIP, NUMBERED keys,
INPUT, TAPE POSITION, or ADD/DLT button does not work when pressed, press the VCR button
on the remote and try the button again.
Weak Signal Display ON/OFF Feature
When “ON” is selected, picture is displayed even when broadcast
signal is weak or nonexistent.
Display menu.
Press ACTION.
2
3
MENU
SET UP VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
ID10МА/LANGUE:ENGL ISH
SELECT:* ▼ KEY
.SET . ,:^..KEY_____________
Display SET UP CHANNEL.
1) Press AT to
select.
2 )
Press ► to
display.
------ SET UP CHANNEL --------
ANTENNA : CABLE
AUTO SET
CHANNEL CAPTION
:OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
SELECT:* ▼ KEY
..SET .,.:K_KEY___________
Set ON or OFF.
1) Press AT to
select.
2) Press ► to set.
ON --> Picture is displayed regardless of signal condition, and
may not always be clearly visible.
OFF ->Screen turns solid blue when signal is absent or weak.
If VCR is connected to equipment which has blue back feature,
selecting ON will have no effect on the other equipment.
Return to normal
screen.
Press ACTION twice.
Auto Shut-Off Feature
When “ON” is selected, VCR shuts itself off when playback of a blank
portion of tape continues or no signal (except when LINE is selected) is
detected for over 5 minutes.
a
Repeat step “a” and “b” on page 38 to
display SET UP VCR.
2
SELECT/
• S E T
3
A:PLAY
,• T:STOP
b
1
ACTION
4
c
b
---------- SET UP VCR
REPEAT PLAY
TIME STAMP
SPAT IALIZER
REMOTE WARN ING
AUTO SHUT-OFF
S-VHS AUTO
SELECT:* ▼ KEY
SET :► KEY
END
:ACT I ON KEY
Set ON or OFF.
1) Press AT to
select.
2) Press ► to set.
OFF
ON
ON
ON
i ■
ON T\
ON
Return to normal
screen.
Press ACTION twice.
39