Panasonic DVD-A360A - Manual (Page 33)

1. Input your 4-dlg(t pas&word and press SELECT,
' Z Clsp^'Puawd
'• ' 9 CI<an'ga'Leval
; 4 TBfnpjTHrv Unlock
’ 6 ед 1 :
2. To unlock the player
Press "1" and tlien press SELECT.
To change the password
Press “2*, enter a new 4-digil password and press
SELECT, then press SELECT again.
To change the rating level
Press "3", select a new level with the joystlok (A, ▼), than
press SELECT.
To unlock the player temporarily
Press “4" and then press SEL£CT,
«The rating Is unlocked temporarily only ter the current
disc. The player le locked again when OPEN/CLOSE Is
pressed or the player le set ta the standby moda.
To finish settkrtg without changing the rating level
Press "0".
Setting id flnished and the Initial Settings screert Is displayed.
Note
«Soma discs may not t>e encoded with specific rating level
infarmatlon though its rf so jacket says tliat it le tor '^ulte".
For those discs, the ege restriction will not work.
This is to select the language to be used in the On-Screen DIs-
play menus which the player will show on the TV monitor,
7 At the Initial settings scTsan (on page 30)
Tilt the joystick {A, T) to select "3 Menu
Language" and press SELECT.
^ ■ .J - pieiilscli • • .
'•5 ЕарйПз!
['Press FIETUaNIbmnail,, ^
---
2 Tilt the joystick {A, T) to select the lan­
guage and press SELECT.
^ English:
English Is selected. (Factory preset)
2 fren;a>«/3 Deutach/4 ttallano/S Eapaneh
The language isselacited.
Setting is finished artd the initial settings screen la displayed.
You can select whether “Play", "SKir and other displays will be
dsplayed or not, and the colour and positiDn of “PEay", "StllP
and other displays as well as 3UI screens.
7 At the Initial settings screen (on page 30)
Tilt the Joyetiok (Aj ▼) to select "4 On-
Screen №$sagee" end press SELECT.
1
5
J
i
i
1 Q
^ вц
s
:'2 CUeiVertdP[^ oi> > ^ f‘BlH •
• ■ • • ' ' . . • ■ ' . • . r
У
; • • Г . ■ ч l 1
S ,
>
t
i 0 . в л - . ' . ‘
^ 4-л'^ гг'.
2
TTIt the loystick (A. T) to select the Item
and press SELECT.
1 On-Scrflen Mesaagee:
To select whether “PlAy", *Stitr and other displays are
displayed or not.
2 Colour and Position:
T d select the colour (BlueAfiDlet/Green) and pceHlon
(abova/slightly balow) of Tlay^, "StiN" and other dis­
plays as welt as GUI Screens.
3 Tilt the Joystick (A, ▼) to select the setting
end press SELECT.
When'T On-Screen nABBsages" leaeleotod
1 On: “Play*, “Siill" and ether dfsplaya will always ap­
pear on the TV screen, (Factory preset)
2 Oft; "Play", 'Still" and other displays will not appear
on the TV screen.
Whan “2 Colour and Position'’ le selected
The colours and posltlorva are set as (otlows:
Blue (Factory preset)
Vfolet
Green
(Continued on the next page)
.E
и
30
* Ч ■ я "