Panasonic DVD-A360A - Manual (Page 37)

Rdcommended setting ol “Digital Audio Out­
put”
h>1ake settings a« shown in table below depending on Ibe kind
of
equipment that Is connectod to the opticaJ/ooaiHiial digital au­
dio Output Con nectar.
Type of e<tutprttei>t
to be connected
Recomntertded setting
1 LPCM
96k^k
2 Dolby
Digital
3dts 4 MPEG
No equipment Is
connected
1
EUlstttELm 1 PCM £0M j
Dolby Digital
(AC-3) decoder
(See page 12.) Yes^s Siistream ECM PCM*^
Dolby Digital
(AC-3)/dta decoder
(See page 12.)
Yes'*2 Bitstream Bitstream PGM-3
Dolby Digital
(AC-3)/dt8/MP£G
audio decoder
(See page 12.)
Yes-“ BitstTflamBitsiream Bitstream
•Underlined items are factory preset.
*^1 Do not connect to the digital audeo input of an emplifier th^
does not have Dolby Digital (AC'3)/dte/MPEG audio decode
er: if such an amplifier should be cortneclad to the player
with “Bitatream" selected at the “2 Dolby Digitar, “3 dtsT
andTor “4 MPEG", any attempt to play DVDs (or CDs record­
ed In dtsj may causa such a high level of noise that It may
be hannful to your ears and damage your speakers.
96 kHz LPCM eound la converted to 48 kHz 18 bit sound
when this player is connected vutth an optical digital audio
cable or coaxial audio cable.
Oo the following if you wish to take advantage of high quality
96 kHz sound.
Select "1 Mo" and connect this player's audio output connec'
tor to an amplifier's audio input connector with tha audio/
video cable {included] or an audio i:^ble (not Inci tided).
Note that LPCM, Dolby Digital, dts and MPEG signals will ell
Pa output in 2 cbannair analog form.
‘'^Only the Z front speaker channel signals will be output'
through the digital audio output connsctor vuhen an MPEG
disc recorded In more than 2 channels Is played If “PCM" le
eeloctod in '4 MPEG'', if you have set speakers other than
Ihe front speakers ae being present (Targe, Small, or Yes')
in “6 Speaker Setllrtif (see page 37). Go to "B Speaker Set-
bng" and eet epeakers other than the front 2 ae being absent
( W ) .
7 At the Initial settings screen (on page 30)
Tilt the Joystick (A, T] to select "8 Speaker
Setting” and press SELECT,
Centre
Laroe/Small/Mo
Front (L) —
Large/Small
Centre
Delay tlme^
fO msi.
^
Centra
Channel balanca 10
dB)
-------— Front (R)
Large/Smail
Ь *res3 4QJiira,tfi-.anoil ' i
Surround (L) —
Large/Smail/tlP
SumouTvd (L)
■ M и *■ c
I
— Subwoofer
Yea/ble
Subwoofer
Channel
balarrce 18 dB>
Sunound(R)
' Lerge/Smatll^
Surround (R)
Channel balance fOdBI
Channel balarrce
(Sim
Surround (L/R)
Delay time’*
(£Lms)
• U ndsrfinod itome are factory preset.
■Delay time adjustmeni la effeclive only for DVDs recor­
ded in Dolby Digital (AC-3).
2
Tift the joystick {A, W, ^4, >) to select the
Item and press SELECT.
3
Tilt the joystick (A, V) to select the setting
and press SELECT.
Speaker icons:
•If tha speaker Is connected, display the toon with the joy-
sttok (A. T) and press SELECT.
•If the speaker eupports tow-frequency (under too Hz)
reproduction, salaot the large Icon. If tha speaker does
not support Ibw-frequsncy reproduction, select the small
kon. {V^on a subwoofer is not connected, be sure to
select "Large" for the front apeakars (L/R),]
In ca^ of surround speaker (L)
No Large/Yes Small/Yes
&
ta
3
(Continued on tha next page)
37
• 7. •