Panasonic DVD-A360A - Manual (Page 44)

Troubleshooting
Before requesting ssAfice for №l3 player, check the chart befow for a. poseiUe cause cf the problem you ere experiencing. Some eimple
cheeks or a rninor adjustment on your part may eliminate the problerr and restore proper operaticn.
Jf you are in doubt about some of the cheek points, or ff the remedias indicated In the chart do not solve the problem, consult your
dealer for instructions.
Mo power. Insert ths AC plug securely Into the AC outlet. 6
The player Is automatically eet to the
standby rrtode. To conserve power, the player is autematicatty set to the standby mede atrer
approx. 33 minutes have elapsed In the stop meda [Autc power-off function}.
Turn the power back to ON.
-
•flay fails to start even when PLAY
Is pressed.
•Play starte but than stops immedl-
atoly.
•Condensation has formed: wart about 1 to 2 heurs for It to evaporate.
•This player cannot play discs other than DVDs^ Video CD and CD.
•The disc may be dirty and may require cleaning.
•Ensure that the dlec is installed with ths tabei of the side to be played facmg
upwards.
4
4e
14
No picture. •Ensure that the equipment Is connected properly.
■ Ertsure that the Input setting for the TV is Video. 6,9
•No sound.
• Distorted sourKi. •Ensure that the equipment is connected property.
•Eneure that ths input setUnge for the TV and stereo system are correct.
•Adjust the master volurne using the GUI screen tor player Information.
$-12
21
Picture is distorted during rapid
advance or rapid revarso.
The picture will be somewhat distorted at times: thte fs normal. —
№ key Operation {by the player anc^
or the remote centre)) Is effective.
•Some oporatlone may be prohibited by the disc.
•Press POWER (ib) to set the player to the standby mode and then back to
ON. Altemath/ety, press POWER «!;)) to eet the player to ths standby mode,
disconnect the AC cord and then reconnect It. [The player may net be
operating property due to lightning, ^tlc eiectricity or some other extemal
tactor.)
——
Mo 4:3 (16:9) picture. Ohooee lbs setup “6 TV Aspect' item matching the TV sei. 35
Mo on-ecreen display. Ths “OfT setting is selected for “1 On*Screen Messages" in "4 On-Scraan
Messages'": select hGn*. 33
No opsratrons can be performed with
the remote control.
•To conserve power, the player is automatically set to the standby mode after
approx. 30 minutes have elapsed in the stop mode (Auto power-off function).
Turn the power hack to ON.
•Check the batteries are instated with the correct polarities (+ and '■).
•The batteries are depleted: replace them wfto new ones.
•Point the remote control at tha rerrtote control sensor and operate.
•Operate Ihe remette control at a distance of not more than 7 m from the
remote control sensor.
•Hemeve the obstacles between the remote control and remote control
sensor.
13
13
13
13
13
TV set cannot be operated by the
remote control.
Not all TV models and brands can ) m operated wito ths universal remote
control supplied.
43
GUI screen not displayed or only
partially displayed on the TV screen. Change the position cf the GUI screen using "2 Colour and Position" in “4 On-
Screen Messages" of the Initial settings. 33
^9' ••