Panasonic DVD-A360A - Manual (Page 8)

Basic connection
•ensure that this player and ether equipment to be connected are set to the stardty mode or off and discorrkect the AC cord before
oommerkCirig cannectran.
•Do not block ventNatlon holes of any of the equipment and arrange them go th^ air can circulate freely.
•Reed through the Instructiane before connecting other equipment.
•Ensure that you observe the colour coding v^on cohnecting audio and vfdec cabJes.
•Select the appropriate screen type at the initial s e t t i n g T V AspeoT according to your TV ssr [4:3^16:9 and Standard (Direct View
TVJ/CFrr Pfojector/LCD Projactor/Projection TV], (See page 35,)
Note
•Peripheral equipment and cords sold separately uniess otherwise indicated.
♦During DVD play, the TV volu me may be at a lower level than during TV broadcasts, etc, If this is [he case, adjust the volume to the
deerred level.
Stereo TV set
Note
To audio input oonrtector (while, 1”) îTo video inpirt connector (yellow)
To audio input connector (red, "H“)
t
AudloArldeo cable
(ir^cluded)
(See the note at the foot of this page.)
To AC outlet
(AC 220-240 V, BO Hs)
t
To S video Input oonnactor
^ Direction of
^ signal flow
S video cable
AC cord I
(included)
DVD/Vkleo CD/
CD player
,1/
’I
S video output connector
The S (separate) video output connector seperaies the colour (C> and luminance (Y) signals before
Cransmliling them to the TV set ir> order to achieve a sharper picture.
Use tite $ video cable when connecting ^ player to a TV set equipped with an â video Input
connector for the best picture clarity passible.
Note
♦If your TV Is monaural, use a stereo-rnonauraJ audio cable instead of the supplied audli::vVideo cable. The video part of the саЫе
(yellow} can still be used if required. Audio cable
I • j_ ¿ f i = [ E > T o player audio output cormector (white, "L")
To TV audio input conrtector 05=‘=Ц'(=^^^=^
^ To player audio output connector (red, “R”)