Panasonic KXF120 - Manual (Page 45)

Speed Dialing and One-Touch Dialing
(cont)
4 Push FUNCTION to end the operation.
Correcting an error while programming:
Push the STOP/CLEAR button instead of pushing the
AUTO/M EMORY button and then re-program the
correct number.
• If a number was previously stored at this location, it
would remain intact.
To print out the stored numbers, see
page 1-17.
To erase the stored numbers:
Example: To erase the number in memory
station "02”.
1 Push FUNCTION.
Dialing
Lift the handset or push SP-PHONE.
2 Using Speed Dialing:
Push AUTO and then push the Station No.
{e.g. If the Station No. is 12.)
G
3
-KS)
Station No.
DISPLAY
<A12>
•“A" indicates Auto and “12" the speed dial No.
Using One-Touch Dialing:
Push DIRECT CALL.
(e.g. If the Direct station No. is 3.)
>“T" indicates telephone memory location and
“3" the station No.
•You can also erase the stored phone/FAX number
for One-Touch Dialing by pushing the DIRECT
CALL button instead of the memory station at
step 2.
Be sure to push the MODE button after pushing
the DIRECT CALL button when you erase the
FAX number of the FAX memory location.
NOTE:
When you push the DIRECT CALL Button;
•If a document has been placed onto the
DOCUMENT holder, the unit will dial the number
using the FAX memory location.
At this time, the LCD display will show “F”.
•If the DOCUMENT holder is empty, the unit will
dial the number using the telephone memory
location.
3-5