Problem, Cause & remedy, Facsimile – Panasonic KXF120 User Manual

Page 51: Troubleshooting guide, Cont.)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Troubleshooting Guide

(cont.)

Problem

Cause & Remedy

FACSIMILE

f

The ALARM indicator iighta during
transmission.

^_______________________ ______________________

---------------------------------------------------------------------------------------- \

•Confirm whether the cover is closed completely or not.
•When you transmit a document which is longer than

600 mm, the alarm may sound. Open the cover and remove
the document.

• If you have call waiting service, it may have been activated

by another telephone call. Re-connect the unit to a line that

does not have call waiting service.

____________________________ ___ ________ ™__________ J

Recording image is scratchy and cannot be read

compieteiy.

^________________________________________ _____

The Sender transmitted a light density document. Have the
other Sender darken the density of a document (e.g. by
copying) then have them transmit it again.

____________________________________________________ /

The document is not puiied into the unit.

V_____________________________________________

If the document is not property inserted into the DOCUMENT

holder, it may not be pulled into the feeder. Insert the
document sufficiently until it stops.

__________________________ _________________________ y

The other party complains that documents are

being received with distorted letters.

^_____________________________________________

•Someone may have used a telephone connected in parallel

with the unit.

•If you have call waiting service, it may have been activated

by another telephone call. Re-connect the unit to a tine that
does not have call waiting service.

____________________________________________________ J

The unit has been set the automatic Answer

mode, but a document cannot be received

automaticaiiy.

Confirm whether you have recorded the following OGM-“To

send a FAX, push the asterisk button." or not. See page

1 -5. If you cannot transmit, see page 1 -6.

J

When using an automatic diaier (One-Touch

Transmission), i cannot diai the other party’s FAX

number.

\______________________

Confirm whether the FAX number has been stored into the

FAX memory station or not.

When you place your document into the unit, the unit will
automatically select the FAX memory station.

____ „_______ ____________ __ ___ _____________ ____ ^

The START/COPY indicator fiashes for about
40 seconds after your unit receives a caii
automaticaiiy but nothing is recorded.

_______________________

\

The caller hang up during or immediately after the playing of

the OGM.This may occur if the disconnect single is not
transmitted from the Central Office, and your unit is in normal
condition.

____________________________________________________ y

The unit does not operate properiy In telephone

mode, answering machine mode and/or

facsimile mode.

_______ .

Push the RESET button, (found on the bottom of the unit)
If the unit does not operate properly even if pushing the RESET
button, unplug the AC cord and then plug it in again after

1 minute.

J

When 1 receive or copy a document whose

background is very dark or containing photographs,

the unit may produce a high tone.

V______________________ I______________________

This is quite normal.

____________________________________________________ ^

4-3

Advertising