O turn the power on, Set the paper feed selector to the “ n ” position, Handling paper – Panasonic KX-P 1131 User Manual
Page 15: Single sheets and envelopes (friction mode)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Handling Paper
Single Sheets and Envelopes (Friction Mode)
O Turn the power on.
The PAPER OUT indicator will flash
indicating that no paper is installed in the
printer.
@ Adjust the head gap lever for the
thickness of paper you are using.
2 Raise the top cover.
Position
Used for
1 or 2
Thinner sheets
3, 4, 5 or 6
Thick sheets or envelopes
Set the paper feed selector to the
“ n ” position.
This is done by inserting the side pins of the top
cover into the slots in the upper cabinet.
Top cover r----------------- -
rm
Raise the paper support.
Paper support
^
5
^
Note:
• If the extension plate is already installed
( P. 14), it does not need to be
removed.
CO
o
15