Paper parking ( load/park, Load single sheets or envelopes, Paper out detector – Panasonic KX-P 1131 User Manual
Page 31: 2 insert the new paper ( p. 13-16), Using the control panel
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Control Panel
Paper Parking ( LOAD/PARK
This function moves the fanfold paper to the park position, enabling you to use single sheets or envelopes without
removing or wasting your fanfold paper.
1
2
Tear off the printed page(s) of the fanfold
paper being used (P. 16).
Press [ LOAD/PARK] to reverse the fanfold
paper to the park position.
Move the paper feed selector to “ 0] ”
(Tractor Mode).
O
Move the paper feed selector to “ H
(Friction Mode).
^
@ Load single sheets or envelopes.
When you have finished printing, remove the
sheet (or envelope) from the printer.
Paper Out Detector
5
Press [ LOAD/PARK I to reload the fanfold
paper to the first print line.
Your printer has a paper out detector. When an out of paper condition occurs, printing stops, the printer goes to
the OFF LINE mode, and the POWER/PAPER OUT indicator starts blinking. To continue printing to the end of the
current page, follow the steps below.
».
5*
(Q
3*
(D
o
o
3
T)
fi)
3
(D
Press [ON LINE ] repeatedly until the page
is completed.
If the ON LINE indicator is not lit, press
fON LINE ].
2 Insert the new paper ( P. 13-16).
I Note:
• When PAPER OUT DETECT is set to ON { P. 33), printing stops at 1.26 mm (0.5") from the bottom of
the paper.
• The paper out detector can be disabled through the Control Panel Software program (iss- P, 24).
31