Rew/0 — play/x2 ©/ff, Digital tracking, Manual tracking – Panasonic NV-L25 User Manual

Page 18: Hours, Seconds, I minutes, Rew /0 — play/x 2 ---------©/ff ishsbeb

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

REW/0 — PLAY/X2---------©/FF

iSHSBEB

Press the Rewind ◄◄/Review Q Button to rewind the

tape.

REW/©

Press the Fast Forward
tape forward rapidly.

■/Cue Q Button to wind the

©/FF

It shows the elapsed recording or playback time.

Digital Tracking
ON: Select this position for digital tracking.

When playback is started after inserting a cassette, and the
VTR is turned on, the Digital Tracking function wtil be

activated automatically, the Digital Tracking Indicator will
flash for several seconds, and the tracking will be adjusted
automatically (after the adjustment, the Digital Tracking

Indicator will remain lit).
•When the Digital Tracking Indicator is lit and the tape

speed (SP/LP) is changed, the Digital Tracking function
will be activated. However, when the VTR is operating in
other modes than the playback, insert editing and audio
dubbing, this function will not work.

• During playback, the Digital Tracking function will be

activated whenever the playback changes over from an
unrecorded part to a recorded part, provided the recorded
part is longer than 4 seconds.

»When the picture is distorted by noise bars, press

the Tracking ( + ) or (-) Button to select manual
tracking and adjust with these two buttons. The

Digital Tracking Indicator goes out.

To change back to Digital Tracking, press the
Tracking ( + ) and (-) Buttons simultaneously.

Manual Tracking
OFF; Select this position for manual tracking.

•When the playback picture is distorted by noise bars,

adjust by pressing the Tracking (+) or (-) Button,

•To return the tracking control to the former setting, press

the Tracking (+) and (-) Buttons simultaneously.

The

Hours

Seconds

I

Minutes

■” indication will appear when the tape is

rewound further than the tape counter position
‘‘O'.OO.OO’’.

• It

the figures on the Tape Counter do not change

during Fast Forward, Rewind or any of the Playback
tunctions, this means that nothing is recorded on
that tape section.

• The Tape Counter is automatically reset to

"0:00.00" when the video cassette is inserted,

• During

playback of NTSC recordings, the Tape

Counter does not function correctly.

.18)

Advertising