Preparation – Panasonic NV-L25 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Insert Editing is an editing system that allows replacing
scenes on a previously recorded tape by newly recorded
scenes or titles.
It is possible to record new sound at the same time.
eo
Preparation
• Connect the systems needed for the Insert Editing.
• Insert a Video cassette with the erasure prevention tab
intact.
• When performing insert editing from another VTR. set the
Noise Filter/Edit Selector to '‘EDIT ON",
Q Press the Play./x2 Button,
o Locate the tape position where you want the insert
editing to end, and press the Pause/Still Button to put
the VTR into the still playback mode.
0 Press the Reset Button to reset the Tape Counter to
‘■0:00.00’,
Q Press the Memory/Repeat/Search Button on the Re
mote Controller so that the Memory Indicator “M” mark
will light up.
0
Perform review playback to a point the insert editing
start point.
Q Press the Insert Editing Button.
(The Insert Editing Indicator lights up.)
To simultaneously insert new sound, press the Audio
Dubbing Button.
(The Audio Dubbing Indicator will light up.)
Q After the picture to be inserted is prepared, press the
Pause/Stiil Button
( I | ) .
(The insert editing will start.)
• The insert editing will end at the point where the Tape
Counter indicates “0:00.00". and the editing VTR will
stop in the still playback mode.
• It is not necessary to operate the Tape Speed Se
lector.
• The picture quality of an inserted part is always
somewhat inferior to that of the original.
• Avoid performing insert editing repeatedly on the
same part of the tape because the picture quality of
that part becomes inferior,
• Do not press the Memory/Repeat/Search Button
during insert editing. If it is pressed, the Memory
Indication “M” will disappear, and the insert editing
will not end automatically at the preset editing end
point.
• The inserted picture may contain slight colour noise
or the colours may be unstable.
• If insert editing is performed on a tape recorded in
' the NTSC system, the insert editing function will not
1
work correctly.
V______________________________________________
;35)