Preparation – Panasonic NV-L25 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The programming of timer recordings is possible both on
the VTR itself and via the Remote Control Unit,
Programming of as many as 8 timer recording is possible
up to one month in advance.
□ □ □ □ □ □ □
TRACKING
E
Preparation
• Make sure that the clock shows the present time correctly.
• Make sure that the Timer Record Function is set to ‘'Off'.
• Insert a video cassette with the erasure prevention tab
intact.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
For Example;
Programming a timer recording for a TV programme that
will be broadcast on Wednesday, October 27. from 10:30 to
11:45, on programme position (channel) 12, on timer pro
gramme number 2. (Present date-^ October 10, 1999)
^ Press the Check/Programme Button to select the next
unoccupied timer programme number.
• Press the Tape Speed Selector Button until the indi
cator of the desired tape speed (“SP " or "LP ") is lit in
the Multi-Function Display.
SP
PROG
CHECK
0 Press the (-k) or (-) Button to select the programme
position (channei) on which the TV programme will be
broadcast.
>! iV
a
SP DN
=■ Hk
□ □
TRACKING
0
Press the Next Button.
Q Press the (-k) or (-) Button to set the date.
SP
ON
-I
i- -C‘
] □
TRACKING
0
Press the Next Button.
Press the (-k) or (-) Button to select the hour of the
starting time of the TV programme.
! i
I c
SP -
t
-4iv^
n □
TRACKING
Q Press the Next Button.
Q Press the ( + ) or (-) Button to select the minute of the
starting time of the TV programme.
SP
ON
vL.
= -Ik
□ □
TRACKING
--------
@ Press the Next Button.
:23.