How the intro scan function works – Panasonic NV-L25 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How the Intro Scan Function Works...
Tape is
Playback for about
10 seconds
The Intro Scan function plays back the first 10 seconds of
each programme (recorded with index signal) on a tape one
after another. This is convenient for quick checking what
programmes are on a tape, or to find the desired instalment
of a TV series you have recorded on a tape.
^ Insert a video cassette.
(Put the VTR in the stop mode.)
Q Press the Memory/Repeat/Search Button.
(“S” mark appears.)
o Press the Fast Forward ►►/Cue © Button.
(The Intro Scan starts.)
Q When the desired scene is reached, press the Play/x2
Button twice.
•The Intro Scan function may not be activated for the
first programme recorded close to the beginning of
the tape.
• During the Intro Scan, if there is a portion without
any recording on the tape, the Intro Scan function
will be activated at that position to play back the
tape for about 10 seconds, and the Intro Scan will
then continue.
• The Intro Scan function may not be activated, if the
interval between programme starts is less than
5 minutes in the LP mode, or less than 2 minutes in
the SP mode.
30/