Panasonic NV-L25 - Manual (Page 28)

ER RECORDING (CO
■■HPPOT
umi
For Evc»ryday Recordiriig
When programming an everyday recording using the bar
codes, you have the choice between 3 different modes:
Sunday through Saturday, Monday through Friday, and
Monday through Saturday.
(T) Turn on the Digital Scanner and trace the “CHANNEL"
bar code.
@ Trace the desired “EVERYDAY” bar code ( 0 , @, 0).
r
(SU~SA)
SU MO TU WE TH FR SA
ON OFF
Trace the “START TIME” and then the “END TIME”
bar codes, and transmit the data to the VTR.
SU MO TU WE TH FR SA
ON 8
n n
■ u u
OFF
m n n
• u u u
• Everyday recording will be performed from that day on.
• If a “DATE” bar code is traced after tracing the
“EVERYDAY” bar code, everyday recording will not be
performed.
ForEveryweek Recording
Q Turn on the Digital Scanner and trace the “CHANNEL”
bar code.
^ Trace the bar code for the desired day of the week
among the “EVERYWEEK" bar codes.
EVERYWEEK
Sunday ------------ 11
HI a I Monday
-irul 1 U€5Gcy ■" — "
lly
iriil
LliU
fral
Saturday----------------------------- ®
0 Trace the “START TIME” and then the “END TIME”
bar codes, and transmit the data to the VTR.
SU
S
ON
j n n n
C u u u
OFF
c c
n n
u u
• Everyweek recording will be performed from that week on.
• If a “DATE” bar code is traced after tracing the “EVERY­
WEEK" bar code, everyweek recording will not be per­
formed.
Ta Confirm tim Programme of a Timer Recording
To perform this operation, the VTR must be turned on or it
must be in the timer recording standby mode ([T] indication
is lit).
(T) Trace the “CHECK” bar code.
• After releasing the Transmit Button, the programmed
data will be displayed for about 12 seconds (for about
25 seconds, if the [i] indication is not lit) on the
Multi-Function Display.
• At every push of the Transmit Button, the timer pro­
gramme number advances to the next higher num­
ber.
ToCaitcef a Programmed Timer Recording
To perform this operation, the VTR must be turned on but
not be in any of the recording or playback operation modes,
or it must be in the timer recording standby mode (□ indi­
cation is lit). To cancel a programmed timer recording, its
data must be displayed on the Multi-Function Display. If
they are no longer displayed, first, trace the “CHECK” bar
code and perform transmission (several times, if necessary,
until the programme you want to cancel is displayed). Then,
within 12 seconds.
0 Trace the “CANCEL” bar code.
0 Perform transmission.
• To programme a new timer recording, perform the
programming from the beginning.
■28)