Panasonic WJ-MX30 - Manual (Page 11)

65. Auto Fade Button (AUTO FADE)
Press this button on for fade-out.
The LED on this button will light and the fade-out will
start.
The transition time can be adjusted using the Auto
Fade/Take Transition Control (60).
After fade-out, the LED on this button will go out and
Fade Out Indicator (69) will light.
Note:
The Fade Out Indicator blinks during fade-out.
By pressing this button during fade-out, fade-out
will be stopped on the way.
66. Matte Fade Button (MATTE)
The video fade signal fades out to the selected Matte
Color when this button is pressed.
67. White Fade Button (WHITE)
The video fade signal fades out to white when this
button is pressed.
I FRONT VIEW
68. Black Fade Button (BLACK)
The video fade signal fades out to black when this
button is pressed.
69. Fade Out Indicator (FADE OUT)
When this LED remains lighted, fade-out is under way.
When this LED blinks, fade-out/fade-in is still
incomplete.
• Audio Mix Section
74. Headphone Level Control (LEVEL)
The audio level of the headphone can be adjusted with
this control.
75. Headphone Jack (PHONES)
Optional headphone can be connected to this jack.
76. Microphone Jack (MIC)
Optional microphone can be connected to this jack.
70. Source 1 Audio Fader (SOURCE 1)
The audio level of the Source 1 input can be adjusted
by sliding this fader.
71. Source 2 Audio Fader (SOURCE 2)
The audio level of the Source 2 input can be adjusted
by sliding this fader.
72. Aux Audio Fader (AUX)
The audio level connected to the Auxiliary Audio Input
Jack (86) can be adjusted by sliding this fader.
73. Microphone Fader (MIC)
The audio level connected to the Microphone Jack (76)
can be adjusted by sliding this fader.
77. Title Input Connector (TITLE)
This connector is used to connect the optional
Character Generator WJ-KB50 (recommended).
The pin numbers are as follows.
(1) : Character In
(2) : Red
(3) ; Ground
(4) ; Green
(5) : Sync out
(6) : Blue
(7) : Ground
(8) : +9VOut
(9) : Ground
(10) : ID
9 -