E-2. external key – Panasonic WJ-MX30 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

• When the REVERSE Button (41) is pressed, the keyed

image and the background image will be reversed.

Normal

Reversed

Two types (shadow, border) and five kinds of edges
are available with the EDGE Button (39).

E-2. External Key

Wipe can be made on the image of A using patterns
with signals supplied from an external camera.
And the image of B can be displayed In the external key

pattern.

• Supply external camera output signals to this mixer.

Normal

Narrow Border

Wide Border

Narrow Shadow

Wide Shadow

Drop Shadow

Notes :

1. When a Key image is white, any of 9 colors can be

selected for the threshold edge, solid or graded,
by pressing the Matte Color Selector (5) and the
Graduation Button (4).

2. Matte Color key images always have a black edge.
3. When a line color setting is made at the WJ-KB50,

press the Fill-matte Button (37) and select the C/L
Bar position.
When selecting the Matte Button for Bus Input or
Fade Block, matte color setting is also made at the
WJ-KB50.
In this time, the up and down of the screen cannot
be displayed.

4.

When the Double picture-in-picture mode is

selected with the WJ-KB50 use, WHITE Button
(38) is selected automatically.
And a line color setting can be made at the
WJ-KB50.

In this time, the up and down of the screen cannot
be displayed.

5. When using the WJ-KB15, the color setting from

the WJ-KB15 is not available.

Press the Split Wipe Button (15) four times.

• The LED on this button blinks.

Move the Wipe/Mix Lever (58) to the B-bus position

from the A-bus position.

• Adjust the Key Slide Control (33) to obtain a clear edge

wipe image.

Notes :

When the video signal of B-bus is the same as

that it of the external camera, the perfect pattern

may be not available due to the condition of the
contrast of the pattern.

When pressing the Reverse Button (19), Image of

A and B shown the above will be reversed.

The External Camera Pattern should be white on

a black base.

• The External Camera Pattern can be edged using

the Wipe Edge Button (16).

-

23

-

Advertising