System connection – Panasonic WJ-MX30 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SYSTEM CONNECTION
Monitor
Preview
Monitor
Program
Monitor
The following models (or equivalents) are recommended for
this system. The S-video signal and stereo audio signal are
also recommended to obtain quality edited outputs.
Digital AV Mixer
WJ-MX30
Character Generator
WJ-KB50
External Camera
WV-D5100
Playback VTR
AG-7150
Recording VTR
AG-7350
Monitor TV
1. Connect coaxial cables between the Advance Sync
Output Connectors (93) on this unit and the Advance
Sync input on both playback VTR 1 and VTR 2.
2. Connect audio cables between the Source 1 Audio
Input Jack (80) / Source 2 Audio Input Jack (83) on
this unit and Audio Output Connector / Audio Input
Connector on the playback VTR-1 / VTR-2 / Recording
VTR, respectively.
3. Connect S-video cables between the Source 1 Y/C
Input Connector (78) / Program Out-1 Y/C Output
Connector (87) on this unit and the S-video Out /
S-video In Connectors on the playback VTR-1 / VTR-2/
Recording VTR, respectively.
4. Connect an S-video cable from the S-video output
connector of the camera to the External Y/C Input
Connector (84) on this unit.
5. Connect a coaxial cable between the Preview Output
Connector (95) on this unit and the Video Input
Connector on the Monitor TV.
12
-