Troubleshooting – Panasonic UF-333 User Manual
Page 124
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
► Troubleshooting
Replacing the Battery
During the initial self test, when the power is turn ”On”, the machine will evaluate the condition of the back
up battery. If the battery is weak or fully discharged, the following messages will be shown on the display.
REPLACE BATTERY
INFO. CODE=026
To replace the battery, follow the procedure below:
1
Print a File List to conflnn that there is no file stored in memory. (See Note 1)
To print a File List, press
I
FUNCTIOrTI. (9), ® and I SET I.
0 Disconnect the Power Cord.
0 Remove the Battery Cover.
® Remove the Battery by sliding it inward and
then out of the socket.
A
CAUTION
Dispose the battery properly and keep It
away from small children.
0 Install the new battery (Order No.:CR2032)
with the © side facing out.
(2) Re-install the Battery Cover.
0 Connect the Power Cord.
^ If the clock is flashing on the LCD Display, follow the procedure on page 22 to reset the clock.
B
LJ Note: 1. lfthepoweristumed’’Ofrandthebatteryisweakorfuilydischarged,thetransmitandpollingin^fmation
of a file stored in memory may be lost Howeverthe received documentfs) in memory will be preserved
and will print out automaticaily after the power is restored.
2. The service life of the battery is approximately 1 year when the machine is turned ”Off”.