Sending documents, Ex: (d(d(d©(d(d, Manual number dialling – Panasonic UF-333 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
► Sending Documents
Manual Number Dialling
To dial the telephone number manually, follow the steps below.
1 y/
Set document(s) face down.
ENTER STATION
00
%
2 ^
MEMORY
Make sure that the MEMORY lamp is on.
If not, press I MEMORYH to set ”On”.
ENTER STATION(S)
THEN PRESS START 00%
2 Enter a telephone number from the keypad.
Ex: (D(D(D©(D(D®
TEL. NO.
55512341
4
The document Is stored into memory with a file number.
Then starts to dial the telephone number.
STORE *
N0.002
PAGES=01 05%
* STORE * COMPLETED
TOTAL PAGES=05 25%
* DIALLING * N0.002
5551234
Note: 1. If you need a special access number to get an outside line, dial it first then press I PAUSE I to enter a
pause (represented by a b e f o r e dialling the full number.
Ex: 9 PAUSE 5551234
2. if you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, press
i TONE I (represented by a T).
The dialling mode will be changed from Pulse to Tone after dialling the digit T.
Ex: 9 PAUSE TONE 5551234