To set a program key for normal polling, Program keys – Panasonic UF-333 User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
► Program Keys
Setting for Normal Polling
To set a Program Key for normal polling
1
FUNCTION
SET
PROGRAM[P ]
PRESS PROGRAM KEY
2
3
4
Ex:
Pi
Enter a 4-digit polling password.
Ex;
©(D®®
and SET I
The poiiing password appears if it has been previousiy set.
PROGRAM[Pi]
N0.=
1:PROG 2;ONE-TOUCH
POLLING
PASSWORD=
nil
ENTER STATION(S)
THEN PRESS START
5
6
Enter the station numbers by using One-Touch Key, or
I
ABBR/SEARCH
I
and a 2-digit code.
Ex:
You may use the 0 or 0 keys to review the entered
station(s) before going to next step. If you find an error,
press
I
CLEAR
I
to erase the dispiayed station.
<01>{Station name)
5551234
PROGRAM[PI]
I
NAME
Enter the station name (up to 15 character) using the
Character keys (see page 11).
Ex: PROG.A and
I
SET
You can now set other Program Keys by repeating the
procedures from Step 2, or return to standby by pressing
■STOP I.
PROGRAM[P ]
PRESS PROGRAM KEY