Panasonic NV-HD 630 - Manual (Page 14)

Manual Tuning Procedure Fine Tuning Procedure
Press MENU.
Select TUNER PRESET by pressing
A or ▼ and
ENTER.
Select CH by pressing A or T then select the channel
number you want tuned by pressing < or
Confirm that CLEAR is set to OFF.
Select SEARCH by pressing
A or ▼ then press < or
►.
On Screen Display
If the desired TV station has not been tuned, press < or
again.
• Press MENU and repeat steps 3-^ for each
programme position you want to tune to a station.
• To exit, press MENU three times.
Direct Tuning
1 Repeat steps 1-4 in Manual Tuning.
2 Select SEARCH by pressing
A or ▼.
3 Using the numeric buttons on the remote controller
(Ensure that VCR/TV switch Is set to VCR.), enter the
same number as the number of the channel to be tuned.
For the 5A and 9A channels, input the following
numbers; 90 for CH-5A, 91 for CH-9A.
• For other channels that require tuning, repeat steps 3-
4 in Manual Tuning and steps 2-3 above.
• To exit, press MENU twice.
Press MENU.
Select TUNER PRESET by pressing
A or T and
ENTER.
Select CH by pressing
A or T then select the
programme position by pressing ◄ or ►.
Select FINE by pressing A or T.
Press -4 or P- to obtain the best tuning condition.
• To return the tuning to its former state, press ENTER.
Press MENU.
Blanking of Unused Programme Positions
Press MENU.
Setect TUNER PRESET by pressing
A or T and
ENTER.
Select CH by pressing
A or ▼ №en select the
programme position by pressing ◄ or ►.
Select CLEAR by pressing
A or ▼.
Select ON by pressing ◄ or ►.
• Repeat steps 3-5 for other unused programme
positions to skip during №e selection of programme
positions.
• To cancel the blanking of a programme position, select
that programme position then select CLEAR OFF.
Press MENU twice.
14