Panasonic NV-HD 630 - Manual (Page 6)

infra-red Remote Controller
The remote control unit tor this VCR is a universal remote
controller. As such, some of its buttons are not used to
operate this VCR.
VCR OPERATION
Set VCR/TV switch to VCR for using the
numeric buttons and the G-CODE button.
f.--
Infra-red Transmitter
Numeric Buttons
Selects programme positions (1-99) of the VCR.
•Ensure that VCR—TV switch is set to VCR.
9: ©
19: © — © — ' ©
Programmes G-Code numbers.
•Ensure that VCR—TV switch is set to VCR.
3 0SD
For the On Screen Display Function.
4 RESET
Resets the tape counter (elapsed time) to ‘‘0:00.00^
•The tape counter is automatically reset to "0:00.00"
when a video cassette is inserted
5 ll/►(PAUSE/SLOW)
During playback:
•By pressing: Stiti picture. “ OD" 'S
•By pressing for 2 seconds or more;
Slow pia>tiack." 0>" is lit.
During recording: Interrupts recording.
6 On Screen Display Menu Operation Buttons
MENU:
Makes the on screen display main menu appear on the
TV screen.
ENTER:
Confirms the selection, or stores.
O:
Makes selections from the on screen display.
•These buttons can also be used for playback, stop,
rewind and fast forward mode.
7 Timer Recording Operation Buttons
CH, DATE, ON, OFF:
Programmes a timer recording.
PROG./CHECK:
Sets and checks timer programmes.
CANCEL:
Cancels the settings made for timer recording.
SPEED:
Selects the desired tape speed for recording.
SP gives the best picture quality.
LP (EP) gives the longest recording time.
•The indicator (SP, LP or EP) corresponding to the
selected tape speed now appears on the VCR display
or on screen display.
LP: This appears when PAUMESECAM signals are
input or output.
EP:This appears when NTSC signals are input or
output.
TIMER REC Et:
Turns the timer recording function on and oft.
[9 is lit or not lit.
Once you operate the timer recording function, norma!
VCR operation is not possible unless you press this
button again and release the VCR from the timer
recording standby mode.
8 AUDIO OUT
This button is not used to operate this VCR.