Panasonic NV-HD 630 - Manual (Page 7)

9 No function.
This button is not used to operate this VCR.
10 VCR—TV switch
VCR: Selects the VCR operation mode.
TV: Selects the TV operation mode.
11 INPUT SELECT
Selects the A1 or A2 external recording source.
12 DISPLAY
Changes the indication on the VCR display or on screen
display as follows.
pCIock-*Counter-»Remaining Tape Time—j
13 G-CODE
Used for G-Code programming.
•Ensure that
VCR—TV switch is set to VCR.
14 INDEX
Used for the index search kjnction.
15 REC«
Starts recording.
16 Child Lock Function Buttons
ENTER, OFF (+):
Deactivates all buttons on the VCR and the remote
control by holding down ENTER and OFF (+)
simultaneously until the "X hold” indication appears in
the VCR display.
17 REPEAT
For the repeat playback function.
18 >(PLAY)
Starts pfaybadt. is lit.
For the repeat playback function.
19 VCR/TV
This button is not used to operate this VCR.
TV OPERATION
Set VCR—TV switch to TV for using POWER the v
and y\ buttons and the numeric buttons.
CD
S
vS
CD
QQ
20 POWER Ci)
Press to switch the TV from on to standby mode or vice
versa. In standby mode, the TV is still connected to the
mains.
•With some TV models, it may only be possible to
switch the TV to the standby mode using this button.
In this case, use AV or the v/ and /s, buttons to
switch the TV on.
•Ensure that VCR—TV switch is set to TV.
21 Numeric Buttons
Selects programme positions (1-99) of the TV.
•Ensure that VCR—TV switch is set to TV,
22 AV
Selects TV input or AV input.
23
Selects the required programme position (TV station) of
the TV.
•Ensure that VCR—TV switch is set to TV.
24 VOLUME
Adjusts the volume of the TV.