Symphonic balance (sympho bad: 0 — 100, Modulation frequency (mod fro): 0.1 hz — 20.0 hz, Modulation depth (mod depth): 0% - 100 – Yamaha REX50 User Manual
Page 25: Trigger level (trg. level): 1-100, Release time (release): 5 — 32000 ms
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
/ 30. DIST. + SYMPHONIC
Distortion Level (DISTORTION): 0
100
%
Sets the "degree" or "depth" of the distortion por
tion of the effect.
Symphonic Balance (SYMPHO BAD: 0 — 100%
Determines the amount of symphonic effect applied
to the distortion sound.
Modulation Frequency (MOD FRO): 0.1 Hz — 20.0 Hz
Sets the speed of the effect variation.
Modulation Depth (MOD DEPTH): 0% - 100%
Sets the depth of the effect.
Trigger Level (TRG. LEVEL): 1 - 1 0 0
Determines the amplitude of the input signal required
to trigger the effect. This parameter, in conjunction
with the RELEASE parameter below, functions ef
fectively as a noise gate to cut out hiss and noise
when an input signal is not present. TRG LEVEL
should be set so that the effect is activated only
when a note is played on the instrument used.
Release Time (RELEASE): 5 — 32000 ms
Determines the amount of time it takes for the distor
tion gate to close after the input signal drops below
the trigger level. Proper setting of the RELEASE
parameter is essential to allow a natural decay of the
source instrument sound.
24