Stereo insert, Monitor outputs – Yamaha RM602 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
7. STEREO INSERT
This is a TRS (Tip Ring Sleeve) type phone jack, incor
porating both the insert send and receive lines. The
STEREO L and STEREO R INSERT points make it
possible to patch external signal processing equipment
independently into the left an^ right stereo busses,
preceding the master stereo faders. This is an ideal place
for insertion of graphic equalizers, Yamaha GQ1031 for
example, for precise response tailoring of the overall
stereo program. The TRS jacks are wired as shown in
the following diagram.
8. MONITOR OUTPUTS
These are the line outputs from the stereo monitor buss.
They can be fed to a stereo power amplifier and monitor
speaker system, or directly to a pair of powered monitor
speakers such as the Yamaha MS10.
INPUT GND
8