Panasonic Panafax UF-744 - Manual (Page 134)

“fTroubleshooting
1080001
080007
m
060008
380009
380010
Mode Symptom Action page
Print Copy Quality
Vertical lines printing
on the received
document
Printout a Journal report (e.g. FUNCTION, 6,1 and SET) and
check quality to make sure If your machine has trouble or not
If Journal report quality is OK, your machine has no problem,
report to sending party that they have a problem.
If copy is NG, replace the Toner Cartridge.
117
16
Fuzzy print 1. Make sure you are using the correct paper for the best
possible print quality.
2. Try reversing the recording paper to the other side.
146
Missing dots or
lines/inconsistent
darkness within print
1. Make sure you are using the correct paper for the best
possible print quality.
2. Replace the Toner Cartridge.
146
16
Print Copy Quality
Fading print The Toner Cartridge may be ninning out of toner. Replace the
Toner Cartridge. 16
Faint print You may need to choose a different paper for the best possible
print quality.
146
Communication
No dial tone 1. Check the connection of telephone line^
2. Check the telephone line.
141
No auto answer 1. Check the connection of telephone line.
2. Check Reception mode setting.
3. Check if machine is printing a report, (e.g.: 32 Transaction
Journal, Fax Parameter Ust).
If machine is printing a report, machine cannot receive until
printing is completed.
4. If the printed document is 32nd Transaction, machine will
usually print the 32 Transaction Journal automatically after
printing out the document, in this case, machine cannot
receive until the 32 Transaction Journal has been printed.
141
59
Cannot transm it or
receive An information code will be shown on the display. Refer to the
information code table to find out the trouble. 131
No Unit Operation
No unit operation To reset the machine, turn-off the Power Switch for a few second
then turn-on again.
Vi
<y
130