Glossary – Panasonic Panafax UF-744 User Manual
Page 156
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
?oaooi
^990053
'990054
*990055
990056
990057
990058
Glossary
?90059
Ш)60
Ш}61
>90062
90063
90064
90065
ЛТ- '
Э0066
W067
Ю069
>0070
0071
One-Touch dialling
ORIGINAL
Panasonic Super Smoothing
Polling
Polling password
Power Failure Report
Print reduction modes
Program keys
PSTN
Receiving password
Relay station
Relay network
Relay Transmission
Relay Transmission Report
Relay address
RESOLUTION
Selective reception
Stored documents
The ability to dial an entire telephone number by pressing one key.
Signifies the scanning sensitivity in terms of lightness and darkness of
your originai transmitting pages.
An electronic Image enhancement (Panasonic Super Smoothing) that will
creates a particular pattern for the improvement of copy quality.
The ability to retrieve a document from another facsimile machine.
A 4-digit programmed code that enables the security of a document being
polled.
A report that contains information on the last transaction that took place
during a power outage. (UF-788 will print this report only when the memory
back-up battery has been dis-charged.)
The methods used to determine how an incoming document will be
reduced to print onto the paper loaded in your machine.
Keys that are defined for storing a sequence of stations to be dialed or
polled.
Public Switched Telephone Network, Network of interconnected switching
equipment and transmission facilities.
A 4-digit password that is checked before a document is received.
A certain type of facsimile machine that can store and forward documents
to an end receive station and/or a relay station in another relay network.
Your machine can not be used as a relay station,
A group of facsimile machines that communicate via a relay station.
Sending a document to a relay station, which in turn, sends the document
to the end receiving station,
A report that contains information regarding the last document
transmission to a relay station.
A 2-digit code that identifies your machine is programmed in a relay
network.
Relates to the number of dots scanned or printed per certain square. The
quality of the image increases as the number of dots per certain square
increases.
A function that can be set so that your unit will receive from only those
machines programmed into your dialer.
Documents that have been scanned and now are stored in your machine's
memory.
■Н5-
152