Panasonic Panafax UF-744 - Manual (Page 99)

уогоосоог Password Communications
Э02020004
X>2050003
»3060001
Using Password Transrnission
To use Password Transmission, you can select PASSWORD-XMT OFF or ON for each Transmission by
following the procedure below.
302060007
302060008
302060009
302060010
X)206aaf4
1
2
3
5
6
7
Set document(s) face down.
q FUNCnOH
SET
a
-^^-1 for OFF (password is not checked)
or
for ON (password is checked)
2
"Й"
SET
Dial by any combination of the following methods.
• Manual Number Dialling
(UF-788 ; Up to 32 stations / UF-744; Up to 12 stations)
• One-Touch Dialling
• Abbreviated Dialling
• Directory Search Dialling
(For details, see page 45 to 48.)
Ex: 01
(When entering a station for Manual Number Dialling or
Directory Search Dialling, press I SET I after each
station is entered.)
^ START
DOCOUEKT SET
ENTER STATION (S) 00%
SELECT MODE <l-5)
ENTER NO. OR Л V
PASSWD-3ÌMT-OFF
l;OFF 2;ON
PASSWD-3CMT-OFF
IrOFF 2:ON
or
PASSWD-3CHr-ON
l:OFF 2:ON
DOCUMENT SET
ENTER STATION(S) 00%
ONE-TOUCH
<01>(Station паше)
If your machine’s Transmission Password coincides with the other station’s Transmission
Password, your machine starts sending the document.
302060012 When transmission is completed, PASSWORD-XMT returns to standard setting (OFF or ON).
»2020005 Using Password Reception
There is no additional operation required once you set the parameter following the procedure on the previous
page. The parameter.-OFF or ON, cannot be selected for each reception. It is always OFF or ON until you
302050004 change the setting.
95