2 click enable tripledes, Configuring ldap user encryption key, 1 select servers > ldap – Panasonic NN46110-600 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
28
Chapter 2 Configuring servers
Figure 4
Enable 3DES window
2
Click
Enable TripleDES
.
The 3DES Confirmation window appears. When TripleDES is enabled, all
passwords within the box are encrypted with 3DES as well as any future
passwords that are entered.
3
To confirm the 3DES encryption, click
OK
.
To enable 3DES with the CLI, enter the following command:
Idap-server tripledes-enable
Configuring LDAP user encryption key
With the LDAP user configurable encryption key, you can set your own
user-defined encryption key instead of the default encryption key that is present on
the VPN Router. If you use a user-defined encryption key with an external server,
all the VPN Routers that use that external LDAP server must have the same
configured encryption key..
âs
Warning:
To return to the default encryption key, after you set a
user-defined key, you must reset the VPN Router to factory defaults.
You can use the GUI or the CLI to configure the LDAP user configurable
encryption key.
To change the existing encryption key:
1
Select
Servers > LDAP.
NN46110-600