Configuring internal ldap server authentication – Panasonic NN46110-600 User Manual

Page 41

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Chapter 2 Configuring servers

31

To enable LDAP Optimization Scheduling on specific days of the week at a

specific time, enter the following command:

Idap-server internal optimize specific-time <days of week> time

<hh:mm>

where:

days of week are the specific days for enabling LDAP Optimization

Scheduling.

hh:mm is the hour (00-24) and the minutes of the specific time.

To disable LDAP Optimization Scheduling on specific days of the week, enter the
following command:

no dap-server internal optimize specific-time <days of week>

where:

days of week are the specific days on which to disable optimization scheduling.

Configuring internal LDAP server authentication

Since the VPN Router’s internal LDAP server does not respond to external

queries, two or more VPN Routers cannot share the same internal LDAP database.
To allow sharing between VPN Routers, and to take full advantage of LDAP

-based directory service replication and centralization, use a dedicated directory
service.

The VPN Router synchronizes its cache every 15 minutes. For example, if you
delete a user from an external LDAP database, it can take up to 15 minutes before

all of the VPN Routers recognize the change. Additionally, the LDAP server’s
status is recorded in the event log every 15 minutes.

To configure internal LDAP:

1

Select

Servers > LDAP

. The internal LDAP server is internal to the VPN

Router. If you are using more than one VPN Router or if you are using LDAP

authentication for other network services, consider using an external LDAP
server.

Nortel VPN Router Security — Servers, Authentication, and Certificates

Advertising