Panasonic NN46110-600 - Manual (Page 76)

66 Chapter 2 Configuring servers
— File extension— cacert
— MIME Type— application/x-x509-ca-cert
— Application to use— netscape.exe
e Click OK to complete the Netscape configuration.
f Save the base64 format root CA certificate onto a file with extension
.cacert .
g Select File > Open Page and open the file. Netscape Communicator
guides you to install the CA certificate.
• In Internet Explorer, select Tools > Internet options > content >
certificates > trusted root certification authority tab and select import .
3 Import the root certificate that issued your VPN Router server certificate into
the JRE certificate store.
Note: To satisfy a further name check by Netscape browsers, make the
VPN Router server certificate common name either a DNS name that
resolves to the management IP address or the management IP address.
Configuring SSL/TLS and configuring HTTP services
To configure SSL/TLS and enable HTTP services:
1 Select Services > Available and check HTTPS services on the public and/or
private interfaces. This allows TCP port 443 through the system filter. If you
enable HTTPS on both the public and private interfaces, it allows port 443
through either interface. Figure 10 shows the Services window with port 443
selected for HTTPS.
Note: You can change the port from port 443 to run HTTPS. This allows
you to configure an SSL VPN server at the default 443 port while still
allowing HTTPS management.
NN46110-600